The DOOGEE Shoot 1 is a mid-range device from the Chinese manufacturer. It comes equipped with a 5.5inch FHD screen with screen resolution 1080 x 1920 pixels. It runs Android 6.0 Marshmallow out of the box. It sports Dual Rear Cameras 13.0MP and an 8.0MP Front-facing camera. It has Touch ID. It is powered by an MT6737T Quad Core 1.5GHz SoC paired with 2GB of RAM and 16GB ROM with microSD support up to 256 GB. It houses a Li-ion 3300 mAh batter. Today, in this post, we will be sharing with you how to boot your Doogee Shoot 1 Bootloader/Fastboot mode. There are two methods using which you can boot into Doogee Shoot 1 Bootloader/Fastboot mode.
Steps To Enter Doogee Shoot 1 Bootloader/Fastboot Mode
There are two ways which can help you to boot into Doogee Shoot 1 Bootloader / Fastboot Mode 1) Using Power and Volume Keys 2) fastboot commands via Computer
#1 Using Hardware Keys
Follow the given steps to boot into Doogee Shoot 1 Bootloader by hardware buttons
You have to Press and hold the power button for a few seconds Now tap the Power Off option when the Power Menu appears Now you have to Wait for the Doogee Shoot 1 to completely turn off Then press and hold the Power button and the Volume Down button at the same time Continue holding these two buttons down until you boot into Fastboot Mode
#2 Using PC fastboot Commands
If you want to boot Doogee Shoot 1 into bootloader mode from your PC, then follow the linked guide below
Connect your android to your PC with USB cable Now go to ADB & fastboot folder and Open the command window there(Right click on the empty space inside the folder then select “Open command window here” or “Open PowerShell Window Here” option to launch a command window Now reboot into the bootloader by issuing the following commands. (Make sure your device is detected by your PC)
If you have anything related to this post, feel free to leave that in the comment section down