Manufacturers allow users to unlock the bootloader of their devices and thanks to that rooting becomes a reality. Like all other Android devices, Panasonic Eluga Z1 comes with an unlockable bootloader which means root can be gained on the smartphone after unlocking the bootloader Panasonic Eluga Z1 has a 6.19-inch touchscreen display with a resolution of 720×1500 pixels. The device is powered by an octa-core MediaTek Helio P22 (MT6762) processor coupled with 3GB of RAM and packs 32GB of ROM that can be expanded up to 128GB via microSD card. Panasonic Eluga Z1 runs Android 8.1 Oreo out of the box The Panasonic Eluga Z1 sports rear packs a dual rear camera setup which consists of a 13-megapixel primary camera and a second 2-megapixel camera. It has an 8-megapixel camera. The device houses a 4000mAh battery which is non-removable.
Disclaimer
RootMyGalaxy.net is not responsible for any damage happened to your device(s) while following this guide so please proceed at your own risk. However, we would be happy to help with any problems within our reach
How To Root Panasonic Eluga Z1 With Magisk Manager
#1 Unlock the bootloader
First, unlock the bootloader of your device, guide: How To Unlock Bootloader Of Any Android Using Fastboot Commands
For more information about Android rooting, check out our detailed post here > What Is Rooting Android Phone? Advantages And Disadvantages
#2 Download stock boot image
Download Stock ROM > Download
Download the boot file according to your device. Once downloaded, unzip the file and open it, look for a .zip file. Open that file too, now you will see a file named boot.img (This is the official stock image or firmware)
#3 Patch boot image
Move the boot.img to your device’s internal storage. Download & install the latest Magisk Manager on your device Open magisk manager, On the main screen, select Install > Install > Patch Boot Image File Now select the boot image (boot.img). Magisk will start to patch the boot image. After completion, the file will be saved as “magisk_patched.img” in your Downloads folder
#4 Finally, Root Panasonic Eluga Z1
Connect your device to PC and transfer the “magisk_patched.img” file from your phone’s download section to the platform-tools folder on your PC
Now issue the following command to boot your device to bootloader mode (Make sure your device is connected to the PC)
Now issue the command given below to Flash the patched boot image
For devices with A/B partition system, use the below commands:
Done !!! Just reboot your device. Your device should be rooted now.
